What are the acoustic requirements for a classroom?
Classroom acoustics are the background noise, reverberation and sound insulation conditions that decide whether pupils can hear and understand a teacher. In England, BB93 sets limits by room type: for a new build primary classroom, indoor ambient noise of no more than 35 dB and a mid-frequency reverberation time of 0.6 s or less.[1]
Key points
- BB93 sets three linked limits for a classroom: indoor ambient noise, reverberation time and sound insulation from neighbouring rooms.[1]
- The limits are different for new build and for refurbishment, and for primary and secondary rooms.[1]
- The National Deaf Children's Society reports that an average classroom has a noise level of 60 to 77 dB.[2]
- Rooms intended specifically for pupils with special hearing or communication needs have separate, tighter limits.[1]
How it works
Speech is understood when it is clearly louder than the noise around it, and when its syllables are not smeared by reflections. The design guide from the Institute of Acoustics and the Association of Noise Consultants says the BB93 ambient noise limits were chosen so that an adequate signal to noise ratio is reached without undue strain on the teacher's voice.[3] It also says a classroom with a reverberation time of several seconds makes syllables overlap and lowers intelligibility, and that long reverberation times occur in large rooms with hard wall and ceiling surfaces.[3]
Adding absorption and lowering the ceiling height will generally shorten the reverberation time, and large amounts of fixed absorption are often needed where ceilings are high.[3]
The numbers
BB93 gives these limits for finished, furnished and unoccupied rooms.[1]
- Primary classroom, class base, general teaching area or small group room: 35 dB LAeq,30min new build, 40 dB refurbishment.[1]
- Secondary classroom, general teaching area or seminar room: 35 dB LAeq,30min new build, 40 dB refurbishment.[1]
- Primary classroom reverberation time (Tmf): 0.6 s or less new build, 0.8 s or less refurbishment.[1]
- Secondary classroom reverberation time (Tmf): 0.8 s or less new build, 1.0 s or less refurbishment.[1]
- Airborne sound insulation between two ordinary classrooms (average activity noise, medium noise tolerance): at least 45 dB DnT,w new build, 40 dB refurbishment.[1]
Primary classrooms
BB93 groups the primary classroom, class base, general teaching area, small group room and nursery school room in one row of its tables, so they share one set of values.[1] The primary reverberation limit is tighter than the secondary one: 0.6 s new build against 0.8 s.[1] The impact sound pressure level in a primary classroom as a receiving room is no more than 60 dB L'nT,w new build and 65 dB refurbishment.[1] With natural ventilation the normal-use ambient noise limit is the table value plus 5 dB, while mechanical ventilation noise must meet the table value.[1] The figures for rooms intended specifically for pupils with special hearing or communication needs (30 dB and 0.4 s for new build) are a different row, not the primary classroom limits.[1]
In schools and SEN settings
The National Deaf Children's Society says research shows a link between attainment and good acoustics for both deaf and hearing pupils, and that poor classroom acoustics are particularly challenging for children with mild hearing loss or glue ear.[2] It says there is evidence that 6-year-olds need a signal to noise ratio of at least 15 dB to understand and process speech.[2]
BB93 says pupils with special educational needs are generally more sensitive to the acoustic environment than others, so required reverberation times are shorter, sound insulation higher and ambient noise levels lower for their rooms.[1] The figures for rooms intended specifically for these pupils are a starting point, and alternative performance standards are commonly agreed with an acoustician.[1] The listening conditions measures the National Deaf Children's Society lists include keeping doors shut, fitting plastic buffers to chair and table legs, using fabric on displays, and fitting specialist acoustic boarding to ceilings or walls.[2]
Worked example
These figures are illustrative, not a measured room. A primary classroom of 60 m² and 3 m ceiling height has a volume of 180 m³.[3] Using the Sabine relation quoted by the design guide, total absorption for 0.6 s is 0.161 × 180 ÷ 0.6 = 48.3 m².[3] If the bare room provides 15 m² of absorption, about 33 m² must be added.[3]
What people get wrong
- Quoting one figure for every classroom. BB93 gives 0.6 s for a new build primary classroom, 0.8 s for a new build secondary classroom and 0.4 s averaged across 125 Hz to 4 kHz for rooms intended specifically for pupils with special hearing or communication needs.[1]
- Applying the refurbishment values to a new building. BB93 treats refurbishment values as the minimum acceptable for alternative performance standards in new buildings, not as the target.[1]
- Treating assistive technology as a substitute. The National Deaf Children's Society says radio aids and soundfield systems should be used as well as, not instead of, good acoustics.[2]
How it is measured or checked
BB93 section 2.3 says pre-completion testing and reporting should be carried out by a specialist acoustic consultant, following the Association of Noise Consultants good practice guide to acoustic testing of schools.[1] Reverberation time is expressed as Tmf, the average of the 500 Hz, 1 kHz and 2 kHz octave bands.[1]
FAQ
What is the maximum reverberation time for a classroom?
For a new build primary classroom BB93 allows 0.6 s, and for a new build secondary classroom 0.8 s.[1] Refurbishment limits are 0.8 s and 1.0 s.[1]
How quiet should a classroom be?
BB93 sets an upper limit of 35 dB LAeq,30min for new build primary and secondary classrooms, and 40 dB for refurbishment.[1]
Is BB93 mandatory?
BB93 is Department for Education guidance. It describes the normal way to meet Requirement E4 of the Building Regulations and the School Premises Regulations.[1]
WorkSpace Acoustics surveys and installs acoustic treatment for schools; contact the team to discuss a room.
Sources
- Acoustic design of schools: performance standards (Building Bulletin 93). Department for Education, February 2015. Accessed November 2026.
- Creating good listening conditions. National Deaf Children's Society, last reviewed May 2025. Accessed November 2026.
- Acoustics of Schools: a design guide. Institute of Acoustics and Association of Noise Consultants, November 2015. Accessed November 2026.