What is an echo, and how is it different from reverberation?
An echo is a reflection of sound that arrives late enough to be heard as a distinct repeat. Reflections within about 50 milliseconds of the direct sound blend with it and can help speech, while strong later reflections harm speech intelligibility and, if delayed enough, are heard as echoes.[1]
Key points
- Short-delay reflections arriving within one twentieth of a second (50 milliseconds) of the direct sound are integrated by the ear with it.[1]
- Strong reflections after 50 milliseconds become increasingly detrimental to speech intelligibility.[1]
- Echoes are not the same as reverberation: reverberation is the continuing decay of many reflections, quantified by reverberation time.[1]
- Large areas of acoustically reflective material can lead to localised echoes, focusing and standing waves.[1]
How it works
Sound that leaves a speaker travels directly to the listener and also reflects from surfaces. The direct sound is heard first, and the reflections follow. The Institute of Acoustics and the Association of Noise Consultants say that the loudness of the direct sound can be enhanced by strong, short-delay reflections that arrive within 50 milliseconds, approximately the time the ear needs to integrate such reflections with the direct sound.[1]
Longer delays behave differently. Strong reflections after 50 milliseconds increasingly degrade intelligibility and, if the delay is long enough, are perceived as distinct echoes.[1] Reverberation time is a separate measure: it is the time taken for sound energy to decay to one millionth of its original intensity, a 60 dB reduction.[1]
The numbers
In schools and SEN settings
The design guide gives practical examples. Room shapes can cause focusing and echoes, a rear wall can cause a disturbing echo for the teacher, and in a school hall flutter echoes can occur between large parallel surfaces.[1] It recommends making the ceiling or soffit absorbent, with wall panels as a further option, and says distributing absorption in sports halls and large rooms limits echoes.[1] BB93's reverberation time limits, for example 0.6 s for new build primary classrooms and 0.4 s averaged from 125 Hz to 4 kHz for teaching spaces intended specifically for students with special hearing and communication needs, are stated as reverberation times, not as echo criteria, so a room that meets them can still be checked for specific reflections.[2][1]
Worked example
These figures are illustrative. A reflection from a hard rear wall reaches a listener 70 milliseconds after the direct sound. That is past the 50 millisecond window, so the reflection can reduce intelligibility and may be heard as an echo.[1] A reflection arriving 30 milliseconds after the direct sound falls inside the window and is integrated with it.[1]
What people get wrong
- Calling every long decay an echo. Reverberation is the blended decay of many reflections; an echo is a distinct, late repeat.[1]
- Assuming all reflections are harmful. Short-delay reflections within 50 milliseconds can enhance loudness.[1]
- Relying on one number. The Institute of Acoustics notes that in rooms with a non-uniform sound field reverberation time may not describe the room accurately and other descriptors may be appropriate.[1]
How it is measured
Echoes are found by listening and by analysing the room's impulse response, which ISO 3382-1 uses to derive room acoustic parameters for performance spaces.[3] Reverberation time in ordinary rooms is measured following ISO 3382-2.[4]
FAQ
Is an echo the same as reverberation?
No. An echo is a distinct delayed reflection, while reverberation is the continuing decay of many reflections.[1]
How late does a reflection have to be to count as an echo?
Strong reflections after about 50 milliseconds become detrimental to speech, and long enough delays are heard as distinct echoes.[1]
Can a room have an echo and still meet its reverberation time limit?
Yes, because reverberation time is an average decay measure, and the design guide says it may not describe rooms with a non-uniform sound field.[1]
What reduces echoes in a hall?
The design guide recommends a good distribution of absorptive finishes with diffusion from irregular surfaces.[1]
WorkSpace Acoustics surveys and installs acoustic treatment; contact the team to talk about a room.
Sources
- Acoustics of Schools: a design guide. Institute of Acoustics and Association of Noise Consultants, November 2015. Accessed November 2026.
- Acoustic design of schools: performance standards (Building Bulletin 93). Department for Education, February 2015. Accessed November 2026.
- ISO 3382-1:2009 Acoustics: Measurement of room acoustic parameters, Part 1: Performance spaces. International Organization for Standardization, June 2009. Accessed November 2026.
- ISO 3382-2:2008 Acoustics: Measurement of room acoustic parameters, Part 2: Reverberation time in ordinary rooms. International Organization for Standardization, June 2008, confirmed 2022. Accessed November 2026.