What is speech intelligibility?

Speech intelligibility is the degree to which a listener can understand spoken words, as distinct from merely hearing them. It depends on audibility, which is the speech level against the background noise, and on clarity, which long reverberation blurs. For open plan school spaces BB93 sets criteria using the speech transmission index.[1][2]

Key points

  • Intelligibility is being able to understand, as well as hear, speech, and it depends on both audibility and clarity.[1]
  • Audibility depends on the speech level relative to background noise, often expressed as a signal-to-noise ratio.[1]
  • A classroom with a reverberation time of several seconds makes syllables overlap and degrades intelligibility.[1]
  • For enclosed teaching spaces BB93 relies on ambient noise, sound insulation and reverberation time limits; open plan spaces also need speech transmission index criteria.[2]

How it works

The Institute of Acoustics and the Association of Noise Consultants describe the chain. Background noise from outside, building services, equipment, adjacent spaces and occupancy masks speech, so a rise in background noise decreases intelligibility.[1] Speaking louder helps only a little, is limited, and can strain the voice.[1] Long reverberation then prolongs syllables so they overlap, and people raise their voices to compensate, which adds more reverberant noise.[1]

Reflections help or harm depending on their delay. Reflections within 50 milliseconds of the direct sound add to its loudness, and strong reflections after that become increasingly detrimental.[1]

The numbers

  • BB93 indoor ambient noise limit for a new build classroom: 35 dB LAeq,30mins; refurbishment: 40 dB.[2]
  • BB93 reverberation time limit, new build primary classroom: 0.6 s; secondary classroom: 0.8 s; open plan teaching area: 0.5 s, new build and refurbishment.[2]
  • BB93 speech transmission index for open plan spaces, new build and refurbishment: at least 0.6 within a teaching group and no more than 0.3 between groups.[2]
  • Enhanced criteria such as an STI of 0.75 within groups may be appropriate for pupils with special listening requirements.[1]

In schools and SEN settings

BB93 says that for enclosed teaching and study spaces good speech intelligibility can be achieved by specifying the indoor ambient noise level, sound insulation and reverberation time, whereas open plan spaces are more complex and need STI criteria.[2] It adds that open plan spaces may be unsuitable for some children, particularly those with special hearing or communication needs, and that school client bodies should anticipate the needs of deaf and other disabled children.[2] The design guide says an STI higher than the BB93 minimum, for example 0.75 within groups, may suit hearing impaired students, very young children and students with English as an additional language, but that it may not be achievable at every seating position, so enclosed quiet rooms should sit alongside open learning areas.[1] For rooms intended specifically for students with special hearing and communication needs BB93 sets 30 dB LAeq,30mins and a reverberation time of 0.4 s, new build.[2]

Worked example

These figures are illustrative. In a classroom with a 40 dB background, speech at 55 dB leaves a signal-to-noise ratio of 15 dB.[1] If the background rises to 50 dB, the ratio falls to 5 dB and speech is masked more, so intelligibility falls unless the teacher speaks louder.[1]

What people get wrong

  • Equating hearing with understanding. A pupil can detect speech and still not understand it when noise or reverberation masks the detail.[1]
  • Relying on reverberation time alone. The guide notes that in rooms with a non-uniform sound field additional descriptors such as the speech transmission index may be appropriate.[1]
  • Assuming one STI target for everyone. The BB93 values are minimums for native listeners with good hearing, and the guide suggests higher values for some pupils.[2][1]

How it is measured

The objective measure used by BB93 is the speech transmission index, defined in IEC 60268-16 along with its test signals and measurement and prediction methods.[3] Subjective speech intelligibility is not measured directly in BB93; it is represented by the STI value.[1]

FAQ

What affects speech intelligibility in a classroom?

Background noise, reverberation and the position of speaker and listener.[1]

Is speech intelligibility the same as loudness?

No. Intelligibility is understanding as well as hearing, and depends on audibility and clarity.[1]

How does BB93 measure it?

Through the speech transmission index in open plan spaces, and through noise, insulation and reverberation limits in enclosed rooms.[2]

Why is open plan harder?

Noise from activities in adjacent learning areas raises the background and cuts intelligibility.[2]

WorkSpace Acoustics surveys and installs acoustic treatment; contact the team to talk about a room.

Sources

  1. Acoustics of Schools: a design guide. Institute of Acoustics and Association of Noise Consultants, November 2015. Accessed November 2026.
  2. Acoustic design of schools: performance standards (Building Bulletin 93). Department for Education, February 2015. Accessed November 2026.
  3. IEC 60268-16:2020 Sound system equipment, Part 16: Objective rating of speech intelligibility by speech transmission index. International Electrotechnical Commission, September 2020. Accessed November 2026.
Expert acoustic consultancy and installation for schools, businesses and restaurants across the UK. Specialists in SEN environments.
A specialist division of: Presentation Spaces Group

COMPANY

About
Why Acoustics
Contact Us
Privacy Policy
Glossary
Acoustics statistics

SECTORS

Schools
Businesses
Restaurants

SERVICES

Acoustic Surveys
Acoustic Design
Installation
© 2026 WorkSpace Acoustics Ltd. All rights reserved.
Product images courtesy of Presentation Spaces Group (used with permission)