What is Acoustics of Schools: a design guide?
Acoustics of Schools: a design guide is the November 2015 publication by the Institute of Acoustics and the Association of Noise Consultants that supports BB93. It gives design advice on noise control, sound insulation, rooms for speech and music, pupils with special hearing requirements, open plan teaching spaces and refurbishment.[1]
Key points
- The guide is published jointly by the Institute of Acoustics (IOA) and the Association of Noise Consultants (ANC), and accompanies the Department for Education performance standards published in December 2014.[1]
- It is a revision of the guidance that appeared as sections 2 to 7 of the 2003 edition of BB93.[1]
- The performance limits themselves are in BB93; the guide explains how to design to them.[1][2]
- BB93 names the guide as one route to showing compliance for sports halls and similar unfurnished spaces.[2]
How it works
BB93 sets the limits and the guide supports them. The guide says the BB93 performance standards are the normal means of compliance with Requirement E4 of the Building Regulations, the School Premises Regulations 2012 and the Independent School Standards.[1] It then covers how a design team gets there.
BB93 itself points to the guide in several places: for typical operational noise levels, for the open plan design risk matrix, and for the design route to reverberation compliance in sports halls and swimming pools.[2] The GOV.UK page for BB93 shows a last updated date of 19 December 2014.[3]
The numbers
The guide's structure is its main reference value. It runs to eight chapters and seven appendices.[1]
- Chapter 1 Introduction, chapter 2 Noise control, chapter 3 Internal sound insulation, chapter 4 The design of rooms for speech, chapter 5 The design of rooms for music.[1]
- Chapter 6 Acoustic design and equipment for pupils with special hearing requirements, chapter 7 Design of open plan teaching spaces, chapter 8 Refurbishment and integrated design.[1]
- Appendices cover basic concepts and units, room acoustics, sound insulation, sports halls and similar spaces, equipment noise, modelling of open plan spaces and window actuator noise.[1]
In schools and SEN settings
Chapter 6 is the SEN-relevant chapter. It says the drive towards inclusive schooling means most pupils with special hearing requirements are educated in mainstream settings, with recent surveys showing about 85% of pupils with a permanent hearing impairment in mainstream schools.[1] It lists pupils who may benefit from favourable acoustic conditions, including those with speech, language and communication difficulties, attention deficit hyperactivity disorder, autistic spectrum disorder and auditory processing disorder.[1]
The guide says the audiogram is easy to measure but says little about a pupil's hearing for speech in background noise, so a hearing loss figure alone does not predict how a pupil will cope in a room.[1] Its authors say specialist advice from an educational audiologist and a specialist acoustician should always be sought for accommodation designed for hearing impaired pupils.[1]
Worked example
The guide includes the Sabine relation for reverberation time, T = 0.161 V / the sum of absorption areas, with the warning that it should be used with caution where the sound field is not diffuse.[1] In an illustrative 150 m3 room with 15 m2 of absorption, T is 1.6 s.[1] BB93 allows a new build primary classroom no more than 0.6 s, so the design would need about 40 m2 of absorption in total.[1][2]
What people get wrong
- Treating the guide as the standard. The numerical limits are in BB93; the guide supports them with design methods.[1][2]
- Assuming it is current. It dates from November 2015, so check for newer editions of both documents before quoting.[1]
- Quoting it for rooms outside schools. It was written for school buildings.[1]
How it is used
Acousticians use the guide when specifying a design for E4 or School Premises Regulations compliance, and when preparing evidence for the building control body or for an alternative performance standard.[1][2] The ANC testing guide it cites is separate and is the reference for pre-completion measurement.[1][2]
FAQ
Who published Acoustics of Schools: a design guide?
The Institute of Acoustics and the Association of Noise Consultants published it jointly in November 2015.[1]
Is the design guide mandatory?
No. BB93 is DfE guidance and the design guide accompanies it. The legal requirements are in the Building Regulations and the School Premises Regulations.[1][2]
Does it cover pupils with hearing impairment?
Yes, chapter 6 covers acoustic design and equipment for pupils with special hearing requirements.[1]
WorkSpace Acoustics surveys and installs acoustic treatment for schools; contact the team to discuss a room.
Sources
- Acoustics of Schools: a design guide. Institute of Acoustics and Association of Noise Consultants, November 2015. Accessed November 2026.
- Acoustic design of schools: performance standards (Building Bulletin 93). Department for Education, February 2015. Accessed November 2026.
- Acoustic design of schools: performance standards: BB 93. GOV.UK (Department for Education), last updated 19 December 2014. Accessed November 2026.