What is acoustic modelling?
Acoustic modelling is the use of a computer model of a room to predict its acoustic performance before it is built or altered. For open plan school spaces, BB93 and the Institute of Acoustics guide require a three-dimensional model to predict the speech transmission index for teacher, student and group communication.[1][2]
Key points
- BB93 says STI calculations are required for open plan spaces to comply with the School Premises Regulations, and strongly recommends independent advice from a suitably qualified acoustic technical adviser.[1]
- The model is a three-dimensional geometric model with surfaces that have scattering coefficients and absorption coefficients for each frequency band.[2]
- The model uses octave bands from 125 Hz to 8 kHz and calculates STI in general accordance with BS EN 60268-16.[2]
- STI predictions are rounded to the nearest 0.05 and reported as minimum and maximum values.[2]
How it works
The design guide's Appendix 6 sets out the method. The expected open plan layout and an activity management plan are agreed with the client as the basis for showing compliance. The plan establishes the overall noise level from the indoor ambient noise level, all activities in the space and noise transmitted from adjacent spaces.[2] The model then calculates STI for three situations: teacher to student, student to teacher, and student to student within groups.[2] The background noise for the calculation excludes the relevant speech signal itself.[2]
For a student-to-student check, source and receiver in each pair should be at least 3 m apart, and three pairs per group are used to represent the furthest distances.[2]
The numbers
- BB93 STI criteria, new build and refurbishment: at least 0.6 within a group, no more than 0.3 between groups.[1]
- Model frequency range: octave bands from 125 Hz to 8 kHz.[2]
- Rounding: STI predictions to the nearest 0.05.[2]
- Receiver grid: if used instead of discrete positions, a maximum 1.0 m grid, reporting the 10th and 90th percentile values.[2]
- Submission items include the software name and version, consultant and operator, number of rays and length of impulse, absorption and scattering coefficients used, wire frame diagram with source and receiver positions, octave band background noise levels, and assumptions.[2]
In schools and SEN settings
BB93 states that open plan teaching spaces may be unsuitable for some children, particularly those with special hearing or communication needs, and that school clients should obtain specialist independent advice so that the proposed design and associated 3D acoustic model achieve the required STI.[1] The design guide notes enhanced criteria such as an STI of 0.75 within groups may suit hearing impaired students and others, but that this may be unachievable at all seating positions, so enclosed quiet rooms should be provided alongside open areas.[2] It says detailed speech intelligibility modelling should be carried out in new buildings and extensive refurbishment, except where the risk chart shows most issues are low risk.[2] Modelling also applies in simpler form to sports halls, where it can predict Tmf using a minimum of two source positions and six receiver positions.[2]
Worked example
These figures are illustrative. A model returns STI values from 0.54 to 0.69 for teacher-to-student positions. Rounded to the nearest 0.05 the range is 0.55 to 0.70.[2] The minimum of 0.55 is below the BB93 within-group criterion of at least 0.6, so the design would be changed, for example by adding absorption or moving a screen, and recalculated.[1]
What people get wrong
- Treating a model as a measurement. It is a prediction based on assumed coefficients and an agreed activity plan.[2]
- Modelling only one situation. The guide requires teacher to student, student to teacher and student to student.[2]
- Using it for enclosed classrooms by default. BB93 uses STI modelling for open plan spaces and relies on noise, insulation and reverberation limits for enclosed rooms.[1]
How it is measured
A model is checked after construction by pre-completion testing; BB93 says this should be done by a specialist acoustic consultant following the Association of Noise Consultants guide.[1] The STI method is defined in IEC 60268-16, which covers both measurement and prediction.[3]
FAQ
What does BB93 require for open plan spaces?
STI calculations, with at least 0.6 within groups and no more than 0.3 between groups.[1]
What does the model contain?
A 3D geometry with absorption and scattering coefficients per frequency band.[2]
Is modelling a replacement for testing?
No; commissioning tests check the built result.[1]
Who should do it?
BB93 strongly recommends a suitably qualified acoustic technical adviser.[1]
WorkSpace Acoustics surveys and installs acoustic treatment; contact the team to talk about a room.
Sources
- Acoustic design of schools: performance standards (Building Bulletin 93). Department for Education, February 2015. Accessed November 2026.
- Acoustics of Schools: a design guide. Institute of Acoustics and Association of Noise Consultants, November 2015. Accessed November 2026.
- IEC 60268-16:2020 Sound system equipment, Part 16: Objective rating of speech intelligibility by speech transmission index. International Electrotechnical Commission, September 2020. Accessed November 2026.