What are the acoustic requirements for a school sports hall?

Sports hall acoustics are the reverberation and noise conditions in a large, hard-surfaced activity space. BB93 limits mid-frequency reverberation time by floor area for new build: 1.5 s for halls under 280 m², 2.0 s above 530 m², and 2.0 − ((530 − floor area) ÷ 500) in between.[1]

Key points

  • BB93 treats sports halls separately from classrooms, with a reverberation limit that rises with floor area.[1]
  • The refurbishment limit for an indoor sports hall is 2.0 s whatever the floor area.[1]
  • For sports halls, swimming pools and other normally unfurnished activity spaces, compliance can be shown by design to the Institute of Acoustics guide or by measurement.[1]
  • The design guide says sports halls have long reverberation times through the nature of their construction, which can mean high noise levels and poor speech intelligibility.[2]

How it works

A sports hall has large areas of hard, parallel surfaces, so sound is reflected many times before it fades. The design guide says reflections between large parallel surfaces such as opposing walls can show up as flutter echoes, which significantly increase reverberation time and reduce speech intelligibility.[2] Absorption is therefore spread over the room: on the ceiling, at high level on the walls, or hanging as baffles, with the closer to the floor the absorbent treatment can be placed, the less coverage is needed.[2]

The design guide says reverberation can raise noise levels because people raise their voices to compensate, a pattern it links to school dining rooms and sports halls.[2]

The numbers

BB93 gives these values for unfurnished, unoccupied rooms.[1]

  • Indoor sports hall, reverberation time Tmf, new build: 1.5 s or less under 280 m², 2.0 − ((530 − floor area) ÷ 500) between 280 and 530 m², and 2.0 s above 530 m².[1]
  • Indoor sports hall, refurbishment: 2.0 s or less.[1]
  • Gymnasium or activity studio: 1.5 s or less new build, 2.0 s or less refurbishment.[1]
  • Dance studio: 1.2 s new build, 1.5 s refurbishment.[1]
  • Indoor ambient noise for a sports hall, dance studio or gymnasium: 40 dB LAeq,30min new build, 45 dB refurbishment.[1]
  • For halls used specifically by pupils with special hearing or communication needs, Tmf is averaged from 125 Hz to 4 kHz instead of 500 Hz to 2 kHz.[1]

Assembly halls and multi-purpose halls

BB93 lists an assembly or multi-purpose hall (drama, PE, audio-visual presentations, assembly, occasional music) at 0.8 to 1.2 s new build and 0.8 to 1.5 s refurbishment, with ambient noise of 35 dB new build and 40 dB refurbishment.[1] The design guide says speech wants a dry acoustic with short reverberation, and unamplified music a live one with long reverberation, so the uses conflict.[2]

In schools and SEN settings

The design guide says perhaps the most difficult areas for including pupils with special hearing requirements are large spaces such as assembly halls and sports halls, which need careful design and forethought.[2] BB93 says pupils with special educational needs are generally more sensitive to the acoustic environment, and applies a wider band average to halls specifically for these pupils.[1] The National Deaf Children's Society notes that some subjects may be taught in an echoey hall, and suggests asking how listening conditions in that room could be improved.[3]

Worked example

These figures are illustrative, not a measured hall. A new build hall of 20 m by 20 m has a floor area of 400 m², so BB93 allows 2.0 − ((530 − 400) ÷ 500) = 1.74 s.[1] At a height of 7 m the volume is 2,800 m³, and the design guide's summary of the Sabine method gives minimum absorption of 0.161 × 2,800 ÷ 1.74 = 259 m² at 1 kHz.[2] It requires at least 25% of that absorption on two non-opposite walls and at least 30% on the roof soffit, each at least Class D.[2]

What people get wrong

  • Using one limit for every hall. BB93's new build limit changes with floor area between 280 and 530 m².[1]
  • Treating a flat 2.0 s as the new build figure. That applies above 530 m², and refurbishment.[1]
  • Concentrating absorption on the ceiling only. The design guide asks for a good distribution of absorptive finishes together with diffusion from irregular surfaces.[2]

How it is measured or checked

BB93 accepts either design in accordance with the design guide, or measurement of Tmf following the Association of Noise Consultants testing guide.[1] The design guide says that if the design method is followed and the materials installed as calculated, commissioning measurements would not be required.[2]

FAQ

What is the maximum reverberation time in a school sports hall?

For new build BB93 allows 1.5 s below 280 m² floor area and 2.0 s above 530 m², with a formula between.[1]

Does the same limit apply to an assembly hall?

No. BB93 lists a multi-purpose or assembly hall at 0.8 to 1.2 s for new build.[1]

What treatment suits a sports hall?

The design guide names roof liners, absorptive wall panels at high level and hanging baffles, and describes fair-faced blockwork up to 3 m as one successful design.[2]

WorkSpace Acoustics surveys and installs acoustic treatment for schools; contact the team to discuss a room.

Sources

  1. Acoustic design of schools: performance standards (Building Bulletin 93). Department for Education, February 2015. Accessed November 2026.
  2. Acoustics of Schools: a design guide. Institute of Acoustics and Association of Noise Consultants, November 2015. Accessed November 2026.
  3. Creating good listening conditions. National Deaf Children's Society, last reviewed May 2025. Accessed November 2026.
Expert acoustic consultancy and installation for schools, businesses and restaurants across the UK. Specialists in SEN environments.
A specialist division of: Presentation Spaces Group

COMPANY

About
Why Acoustics
Contact Us
Privacy Policy
Glossary
Acoustics statistics

SECTORS

Schools
Businesses
Restaurants

SERVICES

Acoustic Surveys
Acoustic Design
Installation
© 2026 WorkSpace Acoustics Ltd. All rights reserved.
Product images courtesy of Presentation Spaces Group (used with permission)