What is a workplace noise assessment?
A workplace noise assessment is the risk assessment employers carry out under the Control of Noise at Work Regulations 2005 to find out whether workers are exposed to harmful noise. It estimates daily or weekly personal noise exposure and compares it with action values of 80 dB and 85 dB, and must be recorded.[1][2]
Key points
- The assessment means more than taking measurements; measurements may not even be necessary.[1]
- Employers must make a reliable, representative estimate of workers' daily personal noise exposure, LEP,d.[1]
- The lower and upper exposure action values are 80 dB and 85 dB LEP,d, with peak sound pressure values of 135 dB and 137 dB LCpeak; the exposure limits are 87 dB and 140 dB.[1]
- The findings and the action taken must be recorded, and the assessment reviewed if circumstances change, normally within about two years.[1]
How it works
HSE's guide says to carry out a risk assessment when noise is likely to be a problem: for example if the noise is intrusive for most of the working day, or workers have to raise their voices to hold a normal conversation about 2 m apart for part of the day.[1] The assessment identifies where there may be a risk and who is affected, estimates exposures, identifies what is needed to comply and who needs health surveillance.[1]
Exposure may be estimated from published information, measurements in the workplace, similar workplaces or supplier data, and no allowance is made for hearing protection in the estimate.[1] Exposure can be calculated over a week as LEP,w where it varies markedly from day to day.[1]
The numbers
- Lower exposure action value: 80 dB daily or weekly personal exposure; peak 135 dB.[1]
- Upper exposure action value: 85 dB; peak 137 dB.[1]
- Exposure limit values: 87 dB and 140 dB peak, taking account of hearing protection.[1]
- Review: do not leave it more than about two years without checking whether a review is needed.[1]
In schools and SEN settings
This term does not apply to classroom acoustics. The Noise Regulations protect workers' hearing and do not apply to members of the public exposed to noise from non-work activities.[2] For school workers such as caretakers, kitchen staff and technology teachers the assessment is an employer's duty, separate from BB93, which sets indoor ambient noise limits of 35 dB LAeq,30mins for new build classrooms and 40 dB for refurbishment to support speech communication.[3] The two use different descriptors for different purposes, and a classroom that meets BB93 is far below workplace action values.[3][2]
Worked example
These figures are illustrative. A technician's estimated daily personal exposure is 82 dB LEP,d.[1] That is above the 80 dB lower action value and below the 85 dB upper action value, so the employer provides information and training, and hearing protectors if asked for.[1][2] A second estimate of 86 dB LEP,d is above the upper action value, so the employer must provide hearing protectors and make sure they are used, and identify hearing protection zones.[1]
What people get wrong
How it is measured
Where measurement is used, it is made with a sound level meter and expressed as a daily or weekly personal exposure; IEC 61672-1 specifies the meters.[1][4]
FAQ
What is LEP,d?
Daily personal noise exposure, a combination of how loud and how long someone is exposed.[1]
What are the action values?
80 dB and 85 dB daily or weekly exposure, with an exposure limit of 87 dB.[1]
Do I need to measure?
Not necessarily; HSE says a risk assessment means more than taking measurements.[1]
Does this apply to classrooms?
No. BB93 covers classroom acoustics, and the Noise Regulations cover people at work.[3][2]
WorkSpace Acoustics surveys and installs acoustic treatment; contact the team to talk about a room.
Sources
- Noise at work: A brief guide to controlling the risks (INDG362 rev2). Health and Safety Executive, November 2012. Accessed November 2026.
- Noise at work: Regulations. Health and Safety Executive, no date shown on the page. Accessed November 2026.
- Acoustic design of schools: performance standards (Building Bulletin 93). Department for Education, February 2015. Accessed November 2026.
- IEC 61672-1:2013 Electroacoustics: Sound level meters, Part 1: Specifications. International Electrotechnical Commission, September 2013. Accessed November 2026.