What is sound absorption?
Sound absorption is the process by which a surface takes energy from a sound wave and dissipates it as heat, so that less is reflected back into the room. It is described by the absorption coefficient, from 0 to 1, and it shortens the reverberation time of a room.[1]
Key points
- When a sound wave reaches a surface it is partly reflected and partly absorbed, and the absorbed energy is dissipated as heat.[1]
- A totally reflective surface has an absorption coefficient of 0 and a surface that absorbs all sound has a coefficient of 1.[1]
- Absorption varies with frequency, so coefficients are given for each octave band and surfaces are placed in classes A to E under BS EN ISO 11654.[1]
- Absorption reduces the reverberation time; absorption is not the same as sound insulation, which stops sound passing between rooms.[1]
How it works
The absorbed part of the sound energy is dissipated as heat.[1] The more absorption in a room, the faster the reverberant sound decays. The reverberation time is proportional to the volume of the room and inversely proportional to the quantity of absorption present, T = 0.161 V / ΣSα seconds.[1] The guide cautions that this relation is representative only where the sound field is diffuse, and that many classrooms do not have one because the absorption is not evenly distributed.[1]
Where the absorption sits matters. The traditional reverberation calculation assumes the absorbent surfaces are reasonably evenly distributed, and large areas of reflective material can cause localised echoes, focusing and standing waves.[1]
The numbers
- Absorption coefficient range: 0 to 1.[1]
- Absorption classes under BS EN ISO 11654: A to E, based on coefficients across the frequency range; a very reflective surface may be unclassified.[1]
- For fully open plan teaching spaces, the guide recommends an absorption area equivalent to Class A coverage of 100% of the ceiling area.[1]
- ISO 354 specifies a method of measuring the sound absorption coefficient of materials used as wall or ceiling treatments, in a reverberation room.[2]
In schools and SEN settings
The design guide says classrooms and other rooms for speech often need large amounts of fixed acoustic absorption, particularly where ceilings are high, and that it is unlikely classroom furnishings will provide significant absorption.[1] For a classroom it describes two main ways to place it: make the soffit predominantly absorbent, or hang absorbent rafts or baffles, with wall panels as a further option.[1] BB93 expresses what the absorption has to achieve as a mid-frequency reverberation time of 0.6 s for a new build primary classroom and 0.8 s for refurbishment, and 0.4 s averaged from 125 Hz to 4 kHz for rooms intended specifically for students with special hearing and communication needs.[3] The guide's Class A recommendation applies to fully open plan teaching spaces; it should not be read as a rule for every classroom.[1]
Worked example
These figures are illustrative. A classroom of 168 m3 has a reverberation time of 1.0 s.[1] Its total absorption is 0.161 x 168 / 1.0 = 27.0 m2 (sabins).[1] To reach 0.6 s the room needs 0.161 x 168 / 0.6 = 45.1 m2, so about 18 m2 must be added.[1] A ceiling treatment with a coefficient of 0.9 in the relevant bands adds 0.9 m2 of absorption for each square metre fitted, so about 20 m2 of ceiling would provide it.[1]
What people get wrong
- Confusing absorption with soundproofing. Absorption controls reflections within a room, and sound insulation controls transmission between rooms.[1]
- Assuming one coefficient describes a product. The coefficient varies with frequency, which is why it is given per octave band.[1]
- Assuming all added absorption has equal effect. Where it is placed changes the result, and the simple formula may not hold in non-diffuse rooms.[1]
How it is measured
ISO 354 measures the sound absorption coefficient of acoustical materials used as wall or ceiling treatments, and the equivalent sound absorption area of objects such as furniture, people or space absorbers, in a reverberation room.[2] The results can be used for comparison purposes and for design calculation.[2]
FAQ
What is the difference between sound absorption and sound insulation?
Absorption reduces reflected sound inside a room, whereas insulation reduces the sound passing between rooms.[1]
What is an absorption coefficient of 1?
A surface that absorbs all the sound that reaches it.[1]
Which standard measures sound absorption?
ISO 354 covers measurement in a reverberation room, and BS EN ISO 11654 gives the A to E classes.[2][1]
How much absorption does a classroom need?
It depends on room volume and the target reverberation time, calculated with T = 0.161 V / ΣSα where the formula applies.[1]
WorkSpace Acoustics surveys and installs acoustic treatment; contact the team to talk about a room.
Sources
- Acoustics of Schools: a design guide. Institute of Acoustics and Association of Noise Consultants, November 2015. Accessed November 2026.
- ISO 354:2003 Acoustics: Measurement of sound absorption in a reverberation room. International Organization for Standardization, May 2003, confirmed 2024. Accessed November 2026.
- Acoustic design of schools: performance standards (Building Bulletin 93). Department for Education, February 2015. Accessed November 2026.